Compare whether upgrading from a 6090 to a 1390 CO2 laser cutter is worth the higher illustrative cost. Review working area, freight complexity, shop space, accessory costs, setup difficulty, use cases, and supplier questions before requesting quotes.
Choose 6090 when landed cost, shop space, and easier setup matter most. Choose 1390 when larger sheets, batch production, and long-term cutting capacity justify the higher illustrative machine, freight, and setup cost.
| Buyer need | Better choice | Why |
|---|---|---|
| Lower illustrative landed cost | 6090 | The smaller crate, lower machine quote, and simpler setup usually reduce total cost exposure. |
| Larger acrylic panels or sheet cutting | 1390 | The 1300 x 900 mm bed gives more room for larger sheets and nested parts. |
| Limited shop space or easier unloading | 6090 | 6090 is easier to place, ventilate, and unload in a smaller shop. |
| Better long-term production flexibility | 1390 | More bed area gives more room for future jobs and larger batches. |
| First imported CO2 laser cutter | 6090 | The setup and freight planning is usually more manageable for first-time buyers. |
| Production shop with freight and setup plan | 1390 | If space, unloading, power, exhaust, and budget are already accounted for, the larger bed can be more useful. |
Open both Alibaba entry points to sanity-check working area, laser wattage, included controller, chiller, freight terms, warranty, and supplier response quality. Do not choose only by the lowest listed price.
Sponsored / affiliate marketplace link. EquipBrief may earn a commission. Always verify supplier identity, exact specs, shipping terms, payment protection, and warranty before payment.
Uploaded authorized photos are shown when available. Otherwise, EquipBrief uses original working-area illustrations for purchase planning.
Mid-size CO2 laser cutter for acrylic signs, sheet cutting, and small-batch shop work with lower setup complexity than 1390.
Large-bed CO2 laser cutter for bigger sheets, production flexibility, and batch cutting where freight and setup planning are acceptable.
Illustrative range only. Actual cost depends on supplier configuration, accessories, freight terms, destination, duties, installation needs, and operating conditions. Always verify every quote with suppliers before payment.
| Feature | 6090 CO2 Laser Cutter | 1390 CO2 Laser Cutter | Note |
|---|---|---|---|
| Working area |
600 x 900 mm
|
1300 x 900 mm
|
Verify actual usable area with suppliers.
|
| Best for |
Acrylic signs, sheet cutting, small-batch shop work
|
Larger panels, batch nesting, production flexibility
|
|
| Typical wattage |
80W-100W
|
100W-150W
|
Actual cutting performance depends on tube quality, optics, material, and setup.
|
| Machine budget range |
$1,500–$4,000
Illustrative range only
|
$3,000–$8,000
Illustrative range only
|
Verify included controller, chiller, table, tube, and accessories.
|
| Estimated landed cost |
$3,200–$5,500
Illustrative range only
|
$6,000–$12,000
Illustrative range only
|
Destination, shipping terms, duties, unloading, and setup can change the total.
|
| Shipping complexity |
Medium crate size and easier unloading
|
Large crate, higher freight planning, unloading equipment may be needed
|
Ask for packing dimensions and gross weight.
|
| Workspace requirement |
More manageable for small signage shops
|
Needs more floor space, access clearance, ventilation, and material handling area
|
|
| Upgrade path |
Good middle-size starting point
|
Better capacity if larger work is expected
|
|
| Supplier questions to ask |
Controller, chiller, packing size, shipping terms, warranty
|
Packing dimensions, unloading needs, power, exhaust, chiller, installation support
|
A cheaper quote can become expensive after freight, accessories, duty, setup, and missing spare parts.
| Cost item | 6090 | 1390 | What to verify |
|---|---|---|---|
| Machine price |
$1,500–$4,000
Illustrative range only
|
$3,000–$8,000
Illustrative range only
|
Confirm included tube, controller, worktable, chiller, air assist, exhaust, and accessories.
|
| Freight and crate |
Usually lower freight exposure
|
Higher freight exposure due to larger crate and weight
|
Ask for packing dimensions, gross weight, shipping term, and insurance.
|
| Unloading |
May be easier with smaller delivery access
|
May require forklift, liftgate, loading dock, or rigging plan
|
Confirm delivery method and who handles unloading at destination.
|
| Chiller and accessories |
CW-5000 class chiller is common
|
May need larger chiller and more production accessories
|
Ask whether chiller, exhaust, air assist, lens, mirrors, and spare tube are included.
|
| Duties and taxes |
Still affects landed cost
|
Can be higher because shipment value and freight are higher
|
Ask for landed cost estimate to your country and verify local import rules.
|
| Shop space |
More manageable footprint
|
Needs larger floor area, access clearance, and material staging space
|
Check door width, machine footprint, crate dimensions, and ventilation route.
|
| Setup |
Usually simpler setup plan
|
More planning for power, exhaust, cooling, and alignment
|
Confirm power requirements, installation support, remote troubleshooting, and manuals.
|
| Budget buffer |
Keep buffer for accessories and shipping variance
|
Keep larger buffer for freight, unloading, setup, and spare parts
|
Do not compare machine price alone; compare total landed and setup cost.
|
These questions turn vague listings into comparable RFQ responses.
Question:
What are the exact packing dimensions and gross weight?Why it matters:
Freight, unloading, door access, and final landed cost depend on crate size and weight.Red flag:
Supplier cannot provide packing dimensions.Question:
Which controller, laser tube, and chiller are included?Why it matters:
Included configuration changes the real cost difference between 6090 and 1390.Red flag:
Quote only lists machine size without configuration details.Question:
Can you estimate landed cost to my destination?Why it matters:
Machine price alone does not include freight, duties, taxes, unloading, or local setup.Red flag:
Supplier only quotes EXW machine price and avoids landed cost discussion.Question:
What unloading equipment is required for the 1390 crate?Why it matters:
Large machines may require forklift, liftgate, loading dock, or rigging support.Red flag:
Supplier says unloading is easy but provides no crate weight or handling plan.Question:
What shop space, door clearance, and ventilation setup are required?Why it matters:
A 1390 can be a poor fit if the shop cannot handle access, exhaust, and material movement.Red flag:
Supplier does not confirm footprint, access clearance, or exhaust requirements.Question:
Can you provide a video test with my target material and thickness?Why it matters:
A test video helps verify whether the chosen size and wattage fit the intended use case.Red flag:
Supplier refuses any material test video before payment.Question:
Which shipping terms do you support?Why it matters:
EXW, FOB, CIF, and DDP place freight, customs, and risk responsibilities on different parties.Red flag:
Shipping term is vague or changes after quotation.Question:
What spare parts and warranty process are included?Why it matters:
Larger machines can create higher downtime cost if parts and warranty handling are unclear.Red flag:
Warranty is promised but parts list and claim process are unclear.Example data only. Always verify supplier terms before payment.
| Field | Supplier A | Supplier B | Supplier C | Note |
|---|---|---|---|---|
| Machine size |
6090
|
1390
|
1390
|
|
| Wattage |
100W
|
130W
|
100W
|
Verify actual output and tube brand.
|
| Controller |
Ruida
|
Ruida
|
Controller unclear
|
|
| Chiller |
CW-5000 included
|
CW-5200 included
|
Optional
|
|
| Packing dimensions |
Provided
|
Provided
|
Not provided
|
Ask for crate size and gross weight.
|
| Shipping terms |
DDP
|
FOB
|
Shipping unclear
|
|
| Warranty |
12 months
|
12 months
|
6 months
|
Verify claim process.
|
| Video test |
Yes
|
Yes
|
No
|
|
| Estimated landed cost |
$3,800–$5,500
Illustrative range only
|
$7,000–$11,500
Illustrative range only
|
Unknown
|
Illustrative range only.
|
| Risk score |
Low
|
Medium
|
High
|
Open the 6090 and 1390 Alibaba listings, then use the matrix above to check specs, included accessories, freight terms, and warranty line by line.
Affiliate marketplace link. EquipBrief may earn a commission.
Not sure which size fits your shop? Answer 6 questions and get a 6090 vs 1390 decision brief.
A 1390 can be worth the higher illustrative cost when you regularly cut larger panels, need better nesting flexibility, or expect production growth. If your work is mostly small signs and parts, 6090 may be more cost-efficient.
6090 is often a practical middle-size choice for acrylic signs and small-batch shop work. It becomes limiting if you need larger sheets, bigger panels, or more production nesting area.
The real cost difference includes freight, crate size, unloading, duties, chiller, accessories, power, exhaust, installation, spare parts, and budget buffer. Machine price is only one part of landed cost.
6090 is usually easier to ship, unload, place, and set up. 1390 requires more planning for freight access, floor space, ventilation, power, and material handling.
Ask for packing dimensions, gross weight, controller, tube, chiller, video test, shipping terms, landed cost estimate, spare parts, warranty process, and installation support.
Yes. Use the decision brief form to standardize your requirements. EquipBrief will not share your RFQ brief with supplier partners unless you request supplier quotes.
This guide is based on public supplier listings, common market configurations, equipment-specific RFQ requirements, and editorial review. Price ranges are illustrative only. Always verify specs, shipping terms, warranty, and after-sales support with suppliers before payment.
Illustrative range only. Actual cost depends on supplier configuration, accessories, freight terms, destination, duties, installation needs, and operating conditions. Always verify every quote with suppliers before payment.
Last reviewed: 2026-05-02
Use these guides to prepare a clearer RFQ before contacting suppliers.